Complied matters
With traditional injection machines, fine air bubbles are mixed into the chemicals if injected quickly and therefore a limitation for production tact. We have developed a machine which is able to inject liquid at high speed without fine air bubble in combination with degassing before injection for vacuum injection systems and a variety of other applications.
Technology used
-
Vacuum
We have substantial experience not only simple vacuum chamber and furnace but also mechanism with operation process in vacuum chamber and devices for liquid application. We have also immense knowledge of special vacuum equipment such as vacuum pump, piping and valve etc. and parts.
See machines using this technology > -
The Machine on Vacuum
-
Chemical Injection Machine
Machine to inject chemicals into a special container without air bubbles quickly and accurately.
-
Injection machine for cylindrical (18650) lithium-ion secondary batteries etc.
Machine to inject electrolyte into cell in the manufacturing process of items such as lithium-ion batteries, etc. Developed to shorten the impregnation time by application of pressure in addition to vacuum immersion.
-
Electrolytic injection machine for lithium-ion secondary batteries etc.
Machine to inject electrolyte into cell in manufacturing process such as lithium-ion batteries, etc.
-
Electrolytic injection machine for lithium-ion secondary batteries etc. for small-quantity production
Machine to inject electrolyte into cell in manufacturing process such as lithium-ion batteries etc. This machine requires manual operation and is intended for small-quantity production.
-
Liquid crystal injection machine
Machine to inject liquid crystal into LCD one by one under vacuum after drying LCD input by magazine in a vacuum.
-
18650 cylindrical lithium-ion batteries etc. assembly line
18650 cylindrical lithium-ion batteries assembly line, consistent line from insertion of jerry roll to crimp.
-
-
Degassing
We have substantial experience of degassing required for injection of precise fluid. In liquid crystal, ink and electrolyte for battery, we have a good track record in vacuum degassing, centrifugal degassing, centrifugal vacuum degassing and hollow fiber membrane filter etc.
See machines using this technology > -
The Machine on Degassing
-
Chemical Injection Machine
Machine to inject chemicals into a special container without air bubbles quickly and accurately.
-
Injection machine for cylindrical (18650) lithium-ion secondary batteries etc.
Machine to inject electrolyte into cell in the manufacturing process of items such as lithium-ion batteries, etc. Developed to shorten the impregnation time by application of pressure in addition to vacuum immersion.
-
Electrolytic injection machine for lithium-ion secondary batteries etc.
Machine to inject electrolyte into cell in manufacturing process such as lithium-ion batteries, etc.
-
-
Spreading, Coating
We respond to various applications and coating such as application with dispenser, coating with die coater and coating with transfer system etc. We realize injection in a short time and high-accuracy using our own dispenser for vacuum injection of liquid crystal and electrolyte for battery etc. and using structure to minimalize dripping under vacuum and plunger pump system.
See machines using this technology > -
The Machine on Spreading, Coating
-
Chemical Injection Machine
Machine to inject chemicals into a special container without air bubbles quickly and accurately.
-
Injection machine for cylindrical (18650) lithium-ion secondary batteries etc.
Machine to inject electrolyte into cell in the manufacturing process of items such as lithium-ion batteries, etc. Developed to shorten the impregnation time by application of pressure in addition to vacuum immersion.
-
Electrolytic injection machine for lithium-ion secondary batteries etc.
Machine to inject electrolyte into cell in manufacturing process such as lithium-ion batteries, etc.
-
Electrolytic injection machine for lithium-ion secondary batteries etc. for small-quantity production
Machine to inject electrolyte into cell in manufacturing process such as lithium-ion batteries etc. This machine requires manual operation and is intended for small-quantity production.
-
Seal material coating applicator (with course correcting function)
Machine to have correct seal material application imperviously to work variability by correction of application trajectory with measuring work shape. High performance application machine including material heating function, pneumatic transportation of high viscosity material, UV curing process, inspection process after application and data collection function.
-
Liquid crystal injection machine
Machine to inject liquid crystal into LCD one by one under vacuum after drying LCD input by magazine in a vacuum.
-
-
Leak test
We have technology and experience to perform extremely minute leak test of 1Ｅ-10Pam3/SEC using helium leak detector and to test using differential-pressure meter or flowmeter according to various spec.
See machines using this technology > -
The Machine on Leak test
-
Chemical Injection Machine
Machine to inject chemicals into a special container without air bubbles quickly and accurately.
-
Automobile plumbing components
Assembly machine for automobile parts. Machine to assemble resin parts including laser welding, check air tightness and flow volume.
-
-
Clean Technology
It is not just a matter of constructing machinery using clean production protocols. We take comprehensive measures to ensure the work is free of contamination and contaminant containment. In addition to design and manufacturing we pay careful attention to packing, transportation and installation as well. We have developed this system to allow us to maintain a necessary of cleanliness and reduce costs at the same time. This technology has been used for the production of liquid crystals, semiconductors and precision instruments with classes ranging from 10 to 10,000.
See machines using this technology > -
The Machine on Clean Technology
-
Compact Sensor Assembly Machine
Machine to assemble compact sensors with a size of a few millimeters
-
Chemical Injection Machine
Machine to inject chemicals into a special container without air bubbles quickly and accurately.
-
Sheet to Roll Optical Film Adhering Machine
Machine to adhere 1 sq. meter sheet-shaped film or more with a clearance of 0.5mm to roll film with a width of 1meter or more continuously. Adhered roll films are cut to make sheet-shaped films and are stored.
-
Laminating machine with alignment function for film
Machine to apply heat laminate to each supplied film roll with heated roller. Normally, in case of laminating each film roll, apply only width direction by EPC etc, preventing position gap. However, it is able to adjust the position of not only the width direction but also the flow direction by controlling the amount of both feeds.
-
Liquid crystal injection machine
Machine to inject liquid crystal into LCD one by one under vacuum after drying LCD input by magazine in a vacuum.
-
Single wafer processing film adhering machine
Machine to apply two types of single wafer (sheet shaped) films automatically with a high degree of accuracy without scratches or air bubbles. Each film has a protection film and separator (mold releasing film), which are removed automatically while feeding.
-
-
Fluid Transportation
We developed a superior transport technology which prevents air bubbles in ink injection machines for the ink cartridges of ink jet printers. This technology has been in development for many years. We are currently developing a similar technology for various fluids such as expensive liquid crystal or lithium-ion electrolyte which is sensitive to the environment and requires the sealing of materials with very high viscosity.
See machines using this technology > -
The Machine on Fluid Transportation
-
Chemical Injection Machine
Machine to inject chemicals into a special container without air bubbles quickly and accurately.
-
Injection machine for cylindrical (18650) lithium-ion secondary batteries etc.
Machine to inject electrolyte into cell in the manufacturing process of items such as lithium-ion batteries, etc. Developed to shorten the impregnation time by application of pressure in addition to vacuum immersion.
-
Electrolytic injection machine for lithium-ion secondary batteries etc.
Machine to inject electrolyte into cell in manufacturing process such as lithium-ion batteries, etc.
-
Electrolytic injection machine for lithium-ion secondary batteries etc. for small-quantity production
Machine to inject electrolyte into cell in manufacturing process such as lithium-ion batteries etc. This machine requires manual operation and is intended for small-quantity production.
-
Seal material coating applicator (with course correcting function)
Machine to have correct seal material application imperviously to work variability by correction of application trajectory with measuring work shape. High performance application machine including material heating function, pneumatic transportation of high viscosity material, UV curing process, inspection process after application and data collection function.
-
Liquid crystal injection machine
Machine to inject liquid crystal into LCD one by one under vacuum after drying LCD input by magazine in a vacuum.
-